Loading Events

Upcoming Events › Training

Events Search and Views Navigation

Event Views Navigation

January 2021

e-PSM 101: Overview of Process Safety Management (PSM) – 4 hours On-demand Anytime

January 1, 2021 - January 1, 2022
Talent LMS
USD200

On Demand Course e-Training  PSRG is using On-Demand e-Training learning for Overview of Process Safety Management (PSM) via TalentLMS platform. There are 8 modules that each are followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing all the modules, it will followed by a graded quiz online and issue of a certificate once you pass the final quiz. You…

Find out more »

e-ISD 315: Introduction to Inherently Safer Design – 7 hours On-demand Anytime

January 1, 2021 - January 1, 2022
Talent LMS
USD350

On Demand Course e-Training PSRG is using On-Demand e-Training learning for Introduction to Inherently Safer Design via TalentLMS platform. There are 8 modules that each are followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing all the modules, it will followed by a graded quiz online and issue of a certificate once you pass the final quiz. You have…

Find out more »

e-PSM 113: Human Error Analysis and Human Factors – 7 hours On-demand Anytime

January 1, 2021 - January 1, 2022
Talent LMS
USD350

On Demand Course e-Training PSRG is using On-Demand e-Training learning for Human Error Analysis and Human Factors via TalentLMS platform. There are 8 modules that each are followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing all the modules, it will followed by a graded quiz online and issue of a certificate once you pass the final quiz. You have…

Find out more »

e-PSM 309 Facility Siting – 14 hours On-demand Anytime

January 1 - December 31
Talent LMS
USD595

On Demand Course e-Training  PSRG is using On-Demand e-Training learning for e-PSM 309 Facility Siting via TalentLMS platform. There are 24 modules that each are followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing all the modules, it will followed by a graded quiz online and issue of a certificate once you pass the final quiz. You have…

Find out more »

May 2021

e-LOPA 104: Introduction & Workshop to Layer of Protection Analysis (LOPA) – Houston Time

May 13 @ 9:00 am - 4:00 pm UTC+0
Hybrid e-Training
USD595

COURSE DESCRIPTION DURATION: 7 hours On Demand, 1 Day with LIVE training on May 13, 9AM-4PM PSRG is using hybrid learning for Introduction & Workshop to Layer of Protection Analysis via TalentLMS platform. You will go through modules that each followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing the modules there is a scheduled live question and…

Find out more »

e-PSM 312: Failure Mode and Effects Analysis – May 17-18, 2021 Houston Time

May 17 @ 9:00 am - May 18 @ 4:00 pm UTC-6
e-Training LIVE Trainer
USD595

COURSE DESCRIPTION                                                     DURATION: 2 Days, 9AM-4PM Failure Modes and Effects Analysis (FMEA) is a method for systematically determining the potential failure modes of systems, subsystems and basic components and their cause mechanisms. This helps in developing actions that can be taken to eliminate the causes before it could lead to an incident. In this course,…

Find out more »

e-PSM 216: Quantitative Risk Assessment – May 24-26, 2021 Houston Time

May 24 @ 9:00 am - May 26 @ 4:00 pm UTC+0
e-Training LIVE Trainer
USD1050

COURSE DESCRIPTION                                                     DURATION: 3 Days, 9AM-4PM This training course provides in depth knowledge on how to perform and understand a quantitative risk assessment with the help of Worked Examples. In this course the participant will learn about the key components of a QRA, the expected outcomes, and how to effectively perform and audit QRA studies. …

Find out more »

e-PSM 106: Mechanical Integrity Introduction, Implementation, RAGAGEPs and Risk Based Inspection – (In Spanish) – Houston Time – May 24, 25

May 24 @ 9:00 am - May 25 @ 4:00 pm UTC-6
e-Training LIVE Trainer
USD595

Duration: 2 Days, May 24-25, 9 AM-4 PM Course Description Part 1 on Introduction and Implementation: This course describes what Mechanical Integrity is and ways to implement a MI program. A well implemented MI program will ensure OSHA PSM compliance while providing maintenance, integrity, reliability of safety critical process equipment. Part 2 on RAGAGEPs and Risk Based Inspection: This course covers codes and standards to meet Recognized And Generally Accepted Good Engineering Practices (RAGAGEPs) for PSM covered equipment. The course…

Find out more »

e-PSM 106: Mechanical Integrity Introduction, Implementation, RAGAGEPs and Risk Based Inspection – Houston Time – May 26, 27

May 26 @ 9:00 am - May 27 @ 4:00 pm UTC-6
e-Training LIVE Trainer
USD595

Duration: 2 Days, May 26-27, 9 AM-4 PM Course Description Part 1 on Introduction and Implementation: This course describes what Mechanical Integrity is and ways to implement a MI program. A well implemented MI program will ensure OSHA PSM compliance while providing maintenance, integrity, reliability of safety critical process equipment. Part 2 on RAGAGEPs and Risk Based Inspection: This course covers codes and standards to meet Recognized And Generally Accepted Good Engineering Practices (RAGAGEPs) for PSM covered equipment. The course…

Find out more »

e-PSM 107: Introduction to Management of Change for Process Safety (MOC) – May 27, Houston Time

May 27 @ 9:00 am - 1:00 pm UTC-6
e-Training LIVE Trainer
USD350

COURSE DESCRIPTION                                                   DURATION: 4 Hours, 9AM-1PM This course provides an understanding of a key element of Process Safety Management (PSM), Management of Change (MOC), covered under the U.S. Occupational & Safety Administration (OSHA) PSM Standard, 29 CFR1910.119. MOC is performed to ensure that any changes made to a process are reviewed and the hazards introduced by…

Find out more »

June 2021

e-PSM 105: Auditing for Process Safety Management – Jun 3-4, 2021 Singapore Time

June 3 @ 9:00 am - June 4 @ 4:00 pm SGT
e-Training LIVE Trainer
USD595

COURSE DESCRIPTION                                                     DURATION: 2 Days, 9AM-4PM This course provides an understanding of a key element of Process Safety Management, Compliance Audits, covered under the U.S. Occupational & Safety Health Act (OSHA) Process Safety Management (PSM) Standard, 29 CFR1910.119, and the U.S. Environmental Protection Agency (EPA) Risk Management Program (RMP) Rule, 40 CFR 68. In this…

Find out more »

e-DHA 204: Introduction & Workshop to Dust Hazard Anlaysis – Houston Time – June 3

June 3 @ 9:00 am - 4:00 pm UTC-6
Hybrid e-Training
USD595

COURSE DESCRIPTION                                                                                DURATION: 7 hours on TalentLMS and one day of LIVE training on June 3 Introduction: The course provides a detailed procedure to conduct either a risk-based dust hazard analysis or prescriptive dust hazard analysis. A brief background introduction is…

Find out more »

e-PSM 311: Introduction & Workshop to BowTie Analysis – Houston Time – June 7

June 7 @ 9:00 am - 4:00 pm UTC-6
Hybrid e-Training
USD595

COURSE DESCRIPTION                                                                                DURATION: 7 Hours, 1/2 day LIVE training on June 7, 9AM-4PM PSRG is using hybrid learning for Introduction & Workshop to Layer of Protection Analysis via TalentLMS platform. You will go through modules that each followed by a 2-3…

Find out more »

e-PSM 312: Failure Mode and Effects Analysis – Jun 8-9, 2021 Singapore Time

June 8 @ 9:00 am - June 9 @ 4:00 pm SGT
e-Training LIVE Trainer
USD595

COURSE DESCRIPTION                                                     DURATION: 2 Days, 9AM-4PM Failure Modes and Effects Analysis (FMEA) is a method for systematically determining the potential failure modes of systems, subsystems and basic components and their cause mechanisms. This helps in developing actions that can be taken to eliminate the causes before it could lead to an incident. In this course,…

Find out more »

e-PSM 317: Safety Operability Studies Electrical Power Systems (SAFOPS) – Jun 10-11, 2021 Singapore Time

June 10 @ 9:00 am - June 11 @ 4:00 pm SGT
e-Training LIVE Trainer
USD595

COURSE DESCRIPTION                                                     DURATION: 2 Days, 9AM-4PM This course will introduce SAFOP or eHAZOP study general principles to the attendees.  It will describe the purpose and objectives of different SAFOP study techniques including Safety Analysis (SAFAN), Security and Operability Analysis (SYSOP) and Operator Task Analysis (OPTAN).  In the course, the participants will learn about team composition,…

Find out more »

e-LOPA 104: Introduction & Workshop to Layer of Protection Analysis (LOPA) – (In Spanish) – Houston Time – June 10

June 10 @ 9:00 am - 4:00 pm UTC+0
Hybrid e-Training
USD595

COURSE DESCRIPTION DURATION: 7 hours On Demand, 1 Day with LIVE training on June 10, 9AM-4PM PSRG is using hybrid learning for Introduction & Workshop to Layer of Protection Analysis via TalentLMS platform. You will go through modules that each followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing the modules there is a scheduled live question and…

Find out more »

e-PSM 220: Overpressure Relief and Flare Analysis – Jun 14-16, Houston Time

June 14 @ 9:00 am - June 16 @ 4:00 pm UTC+0
e-Training LIVE Trainer
USD1050

COURSE DESCRIPTION                                                     DURATION: 3 Days, 9AM-4PM This seminar covers the application of relief devices for preventing over-pressure and under-pressure in equipment. The attendee will learn the requirements for designing and documenting pressure relief systems and specifying relief devices for those systems. COURSE BENEFITS Upon completion of this course the attendee will be able to: Describe…

Find out more »

e-PSM 107: Introduction to Management of Change for Process Safety (MOC) – Jun 15, Singapore Time

June 15 @ 9:00 am - 1:00 pm SGT
USD350

COURSE DESCRIPTION                                                   DURATION: 4 Hours, 9AM-1PM This course provides an understanding of a key element of Process Safety Management (PSM), Management of Change (MOC), covered under the U.S. Occupational & Safety Administration (OSHA) PSM Standard, 29 CFR1910.119. MOC is performed to ensure that any changes made to a process are reviewed and the hazards introduced by…

Find out more »

e-LOPA 104: Introduction & Workshop to Layer of Protection Analysis (LOPA) – (In Spanish) – Houston Time – June 16

June 16 @ 9:00 am - 4:00 pm UTC+0

COURSE DESCRIPTION DURATION: 7 hours On Demand, 1 Day with LIVE training on June 16, 9AM-4PM PSRG is using hybrid learning for Introduction & Workshop to Layer of Protection Analysis via TalentLMS platform. You will go through modules that each followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed and the interim quizzes be passed before moving on to the next module. Upon completing the modules there is a scheduled live question and…

Find out more »

e-PHA 203-3: PHA Team Leader – (In Spanish) – Houston Time – June 17

June 17 @ 9:00 am - 4:00 pm UTC-6
Hybrid e-Training
USD1250

COURSE DESCRIPTION                                                                                  DURATION: 21 hours On Demand, 1 Day with LIVE trainer 9AM-4PM PSRG is using hybrid learning for PHA Team Leader via TalentLMS platform. You will go through modules that each followed by a 2-3 question quiz for reinforcement. The system requires that each module be completed…

Find out more »
+ Export Events